Eneo PXD-2030PTZ1080 - Manual (Page 3)

This Quick Guide is for quick installing and connecting the network Speed Dome IP Camera.
For details, please refer to the camera’s User Manual and Installation Guide.
Switch Definition _____
Outdoor
A RJ-45 Connector
B ALARM I/O
C Power
D Micro SD Card Slot
E Factory Reset Button
F Audio I/O
Power & Audio Connector Definition _____
Please refer to the illustrations below to connect power core through the supplied power adaptor,
and set up the audio according to the Audio pin definition.
Power Connector Audio Connector
To power up the Camera, please connect the Ethernet cable to the Camera’s Ethernet Port
and plug the other end of the cable into an IEEE 802.3at High Power over Ethernet (PoE
Plus) Switch. If there is a need to operate the Heater for Outdoor Models, please plug the
AC 24V cable into the Camera’s Power Connector to power up the Camera instead.
Pin Definition Pin Definition
1 AC 24_1 1 LINE_OUT
2 FG 2 GND
3 AC 24_2 3 LINE_IN