Eneo NXD-2030PTZ1080IR - Manual (Page 27)

27
EN
The camera must be installed by qualified service personnel in accordance with all local
and federal electrical and building codes.
Micro-SD Card Insertion
User can install and change Micro-SD card as shown in the following picture.
1. Open the Micro-SD card cover.
2. Install or change Micro-SD card.
3. Tightly close the Micro-SD card cover to ensure waterproofness.
Connections
Connecting the Network
Connect a standard RJ-45 cable to the network port of the camera. Generally a cross- over
cable is used for directly connection to PC, while a direct cable is used for con- nection to
a hub.
Reset Button
Micro-SD Card Slot