Atlantic Water Gardens 6 Color Changing Colorfalls - Manual (Page 6)

6
Remote Control Functions
Preset Light Changing Modes
A
On/Off Button
Touch for one second to turn on or off.
B
Mode Selection
Touch for one second to switch between Color
Wheel and Preset Light Changing Modes
C Color Wheel
D Preset Light Changing Mode Selection (Forward)
E Preset Light Changing Mode Selection (Backward)
F Brightness / Speed (Up)
G Brightness / Speed (Down)
A
C
D
E
F
G
B
Indicator Lamp
1 Solid Crystal White
2 Continuous full spectrum fade change
3 Solid Red
4 Solid Green
5 Solid Blue
6 Solid Aqua
7 Solid Purple
8 Solid Yellow
9 Red-Green-Blue jump change
10 7 color jump change
11 Red-Green-Blue dimmer change
12 7 color dimmer change
13
7 color dimmer then
7 color jump change
14 Flashing Red
15 Flashing Green
16 Flashing Blue
17 Flashing Red and Blue
Mode Selection
• To switch to the Color Wheel: hold the B button for three seconds or until the
light changes to Crystal White. Hold down the B button again, and the light will
return to the last color displayed while in the Color Wheel mode. Run your
finger around the color wheel to select a new color.
• To switch to the Preset Light Changing Modes: hold the B button for three
seconds or until the light changes to Crystal White. Press the D button, and
the light will return to the last preset mode displayed while in the Light Changing
Modes. Press the D and E button to switch between the different preset modes.
Changing the Brightness and Speed
In Modes 1-8 and 14-16, you can use the F and G keys to change the brightness
of the light. In Modes 9-13 and 17, you can use the F and G keys to change the
speed of the light transitions. There are 8 levels for each.
Synchronizing the Remote to the Control Unit
If the remote control stops working properly, please install fresh batteries. If
problems persist, the remote may need to be re-synced to the control module.
Follow the instructions below to re-sync the remote control.