Software operation at client side – ARM Electronics ENDVR9A User Manual
Page 37
Step 1
：
Click
twice to enter Login setup (please refer to page 21“software installation”)
Step 2
：
Key in “User Name” and “ Password”. Click “OK” to establish the connection.
Follow the steps for connection at your client site (remote site). (e.g. If you set up the server at your
office with one static ADSL, you can remotely proceed to watch the video anywhere with a networked
computer.)
Step 3
：
If you could see the video screen as following, you have been successfully connecting to
the server.
33
For example
SOFTWARE OPERATION AT CLIENT SIDE
admin
2004-NOV-18 15:58:36