Rear panel (figure 2) – ARM Electronics SDKBD1 User Manual
Page 5

- 2 -
z
CAM:Select address of the intelligent Speed Dome.
z MENU:Auxiliary control buttons.
z AUTO:To control auto-horizontal rotation for pan/tilt.
z
CLEAR:
To clear inputted data
z
0-9: Number key
z
WIDE:To a wide angle.
z
TELE:To turn to a telescopic range.
z
FAR:To make focus far manually.
z
NEAR:To make focus near manually.
z
OPEN:To open iris.
z
CLOSE:To close iris.
z
ON:Switch on the setting of function.
z
OFF:Switch off the setting of function.
z
CALL:To call the preset position.
z
PRESET
:
To set the preset position.
z SHOT
:
To call cruising track.
2.
Rear Panel (Figure 2)
A. Power input connector: input DC12V power.
B. DC12V Output.
C. Communication connector RS485:
D. ID-Code switch: Used to set the protocol in use and the baud rate of communications.
MENU
Figure 1
GND RS485
+
-
DC12V OUT
+
-
A
B
C
D