Archgard 42-DVT40N - Manual (Page 25)

Northfire 42
25
OPERATION INSTRUCTIONS
FOR YOUR SAFETY, READ BEFORE LIGHTING
INITIAL OPERATION
• Check that the appliance is properly vented and connected to the gas supply.
• Check that the logs and branches are properly placed.
• Check that all external parts, such as grills, door and faceplate are properly attached
and fastened.
• Check that there are no finger prints left on gold surfaces as high temperature can
bake these prints permanently.
NOTE :
When operated for the first few times, the appliance will emit some odor and
fumes. This is due to the heat from the appliance evaporating the oils and solvents
used in fabricating the appliance. Close off the room to the rest of the house and
open all windows. Keep the room well ventilated as smoke alarm may sound. Run
the appliance for at least 4 hours at maximum setting with blower set to “OFF” to
allow paint to cure.
WARNING : If you do not follow these instructions exactly, a fire or explosion
may result, causing property damage, personal injury or loss of
life. Do not operate the appliance with the glass front removed,
cracked or broken. Replacement of the glass should be done by a
licensed or qualified service person
.