Aquatic AV AQ-IP-3B - Manual (Page 6)

Step 4
Step 3
Step 2
E - 5
REMOVE iPod FROM THE BUILT-IN iPod DOCKING STATION
Step 6
Step 7
Step 8
To take out the iPod from the docking station, user can first detach the front
panel, and repeat step 1 to step 8 to take out the iPod & return the iPod
docking inside the unit’s cabinet.
Push the docking back
to
cabinet
Push inwards
Step 1 Step 5
Press the button as indicated below
to unlock the iPod docking.
Pull out the iPod docking
as shown below.
Press button on the left as the
Pull out the iPod as indicated
below by pulling out the stick.
indicated below to unlock the
iPod holder.
Once the iPod unit is remove,
push the stick backward
Once the connected iPod is completely out,
push on the locking buttons on
both sides of the
iPod connector
to release the
iPod as indicated
in the picture,
and remove the iPod unit.
into the iPod docking
station until it stops.
Press towards the iPod unit to hold the
iPod unit firmly in place
Push on the iPod holders on both
sides until they stop.
Push the iPod docking inwards into
the unit’s cabinet until
it stops.
Press down
Press down this button
Press toward this
lock switch
Pull out this stick
Never pull out this stick unless
docking is completely
out. released
Pull out