Aquatic AV AQ-DM-4UBT - Manual (Page 8)

LISTENING TO FM RADIO
8
www.aquaticav.com
1. Press (MODE) on remote control to switch to FM radio mode.
AQ-DM-4UBT
If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown
on the remote LCD.
FM radio is only available when you are in the FM Radio mode.
1. Press (FAST REWIND) or (FAST FORWARD) to seek another station.
2. Press and hold either (FAST REWIND) or (FAST FORWARD) for manual
tuning back or forward.
1. If you want to save the current frequency into memory, press and hold , or
for more than 2 seconds. The station will be stored the to relevant button.
1. Press the , or button once to listen to the station stored in button.
1. Make sure dock and remote are turned on and in ‘RADIO’ mode.
2. Hold down the (AUDIO) button for 3-5 seconds.
3. The remote will display ‘AREA USA’ or ‘AREA EUR’ depending on which tuning
mode is currently selected.
4. Use the & buttons to switch between US or European modes
.
5. Press (PLAY/PAUSE) to select the desired tuning mode.
6. Once you switch modes it will default to the FM station stored in ‘PRESET 1’.
US mode will increase and decrease the FM frequency in steps of 0.1 MHz, e.g. 88.5, 88.6,
88.7 MHz. EUR mode will increase and decrease the FM frequency in steps of 0.05 MHz,
e.g. 88.25, 88.30, 88.35 MHz.
ENTER FM RADIO MODE
TO SCAN OR NAVIgATE CHANNELS
SAVINg RADIO CHANNEL TO MEMORy
LISTENINg TO SAVED RADIO MEMORy
SWITCH BETWEEN US & EURO FM MODES