Aqua Lung Pearl BC User Manual
Page 19

English
© 2012 Aqua Lung International
ADJUSTING THE WAISTBAND LENGTH - HOOK AND LOOP SYSTEM
Lay your BC so that the front of the BC is facing you. Disconnect the waistband buckle, the waist-
band, and shoulder straps so you have open access to the back pad.
1. There is a retaining flap located on the bottom
backside of the back pad. Disconnect the flap and
lift up the back pad to expose the waistband.
2. For each side of the waistband, detach the
hook & loop and adjust to the desired position,
then re-secure the hook & loop. The hook and
loop must overlap a minimum of four inches, but
not extend past the end of the loop.
3. Re-secure the back pad and try on the BC to make sure the waistband length is correct. Repeat
this procedure until the proper length is achieved.