Part names and functions – Elmo TSE270X User Manual
Page 4
- 3 -
PART NAMES AND FUNCTIONS
1
3
4
5
5
6
7
5
9
8
MODEL TSE270X
MODEL TSE271X
MODEL TSE272X
Lens mount
Mount a CS-mount lens.
Camera mount
For mounting a camera on wall, housing, etc.
(1/4"-20UNC thread)
Focusing dial
For fine-adjustment of the lens back-focus.
IRIS terminal
Connect when an automatic iris lens is used.
VIDEO OUT terminal
Connect to a monitor TV, etc. (BNC connector)
AC power terminal
Connect this to optional AC 24V power supply.
Ground terminal
Connect this to the ground wire of the power supply cord.
DC power terminal
Connect this to optional DC 12V power supply.
Power cord
Connect this to AC120V power supply.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU' AU FOND.
Camera control switches
Refer to "CAMERA CONTROLS." on page 6.
10
9
8
7
6
5
4
3
2
1
2
2
10