Amer Networks SGD5 User Manual
Page 13

13
Power is supplied through an external AC power adapter. Check the technical
specification section for information about the AC power input voltage.
1000BASE-T Ports:
Five Gigabit Ethernet ports of 10/100/1000Mbps Auto-Negotiation interface.
LED Indicators
The LED indicators of the Switch include Power, Link/Act, 1000Mbps and
100Mbps. The following shows the LED indicators for the Switch along with
an explanation of each indicator.
z
POWER
This indicator lights green when the Switch is receiving power, otherwise, it
is off.
z
Link/Act
These LED indicators are on when there is a secure connection (or link) to
the desired port. The LED indicators blink whenever there is reception or
transmission (i.e. Activity—Act) of data occurring at a port.
z
1000Mbps
These LED indicators are on when there is a secure connection (or link) to
1000Mbps Gigabit Ethernet device at the desired port.
z
100Mbps
These LED indicators are on when there is a secure connection (or link) to
100Mbps Fast Ethernet device at the desired port.
When the connection (or link) is 10Mbps, both of 1000Mbps and
100Mbps LED indicators are off.