Amer Networks SD8N - Manual (Page 24)

15
should light up as the following:
1. FDX 10/100, COLL 10/100 LED indicator is
OFF.
2. 100LINK/ACT, 10LINK/ACT LED indicator is
lit green.
Hub without Uplink (MDI-II) port
If a hub is not equipped with an uplink (MDI-II) port,
connection can be made using either straight cable or
crossover cable.
A. Using straight cable
When using straight cable, the connection can be made
from the uplink (MDI-II) port of the Switch to any port
of the Hub.
B. Using crossover cable
When using crossover cable, the connection can be
made from any ports of the Switch to any port of the
Hub.
Switch to Switch (other devices)
The Switch can be connected to another switch or
other devices (routers, bridges, etc.) via a two-pair