Emerson EWC20D5 - Manual (Page 17)

- 17 - EN
CHANGE ACCESS CODE
Follow steps 1 to 3 in the “V-CHIP SET UP” sec-
tion on page 16.
4
Enter New code
Press the Number buttons to enter
your desired access code in the
“NEW CODE” space, then enter
the same code in the “CONFIRM
CODE” space. When completed, the menu will
return to “V-CHIP SET UP”.
• Make sure you enter exactly the same new code in
the “CONFIRM CODE” space as one in the
“NEW CODE” space. If they are different, the
“NEW CODE” space is cleared for redoing.
5
Exit the V-Chip setting mode
Hit [SETUP] to exit the menu.
NOTE:
• Your personal access code will be erased and will
return to the default (0000) when a power failure
occurs or when you turn off the power using a
wall switch. If you have forgotten the code, unplug
the power cord for 10 seconds to restore the access
code to 0000.
NEW CODE
X X X X
CONFIRM CODE
_ _ _ _
C
MPAA RATING SET UP
Follow steps 1 to 3 in the “V-CHIP SET UP” sec-
tion on page 16.
4
Select your desired item
Press [K / L] to point to your
desired item, then hit [ENTER] to
select [BLOCK] or [VIEW].
• When you select a rating and set it to [BLOCK],
the higher ratings will be blocked automatically.
The lower ratings will be available for viewing.
• When you set the lowest rating to [VIEW], all
other ratings will automatically be available for
viewing.
5
Exit the V-Chip setting mode
Hit [SETUP] to exit the menu.
Selection Rating Category Explanations
G General Audience
PG Parental Guidance suggested.
PG-13 Unsuitable for children under 13
R Restricted; under 17 requires accompa-
nying parent or adult guardian
NC-17 No one under 17 admitted
X Mature audience only
G [VIEW]
PG [VIEW]
PG–13 [VIEW]
B R [BLOCK]
NC–17 [BLOCK]
X [BLOCK]
B
1
Select “LANGUAGE”
Hit [SETUP].
Press [K / L] to point to “LAN-
GUAGE”.
2
Select “ENGLISH”, “ESPAÑOL” or “FRANÇAIS”
Hit [ENTER] repeatedly to select “ENGLISH”,
“ESPAÑOL”= Spanish or “FRANÇAIS”= French.
3
Exit the Language mode
Hit [SETUP] to exit the menu.
NOTES:
• This function effects only the language on the
screen menu and not the audio source.
• If for some reason the menu is in Spanish or
French, hit [SETUP], press [K / L] to point to
“IDIOMA [ESPAÑOL]” or “LANGAGE
[FRANÇAIS]”, then hit [ENTER] repeatedly to
select desired language, then hit [SETUP].
MENU LANGUAGE
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
B LANGUAGE [ENGLISH]
CAPTION [OFF]
TV