Engine operation – Allmand Brothers TLB 535 User Manual
Page 23
23
ENGINE OPERATION
ENGINE BREAK-IN
OBSERVE ENGINE OPERATION CLOSELY
IMPORTANT: Become thoroughly familiar with the sound and feel of your new machine.
Read and understand the Engine Instruction Manual included with your Allmand TLB .
Refer to the Engine instruction manual for seasonal fuel and oil viscosity recommendations.
NOTE: Engine is warranted to the original owner by the manufacturer.
OPERATOR RESPONSIBILITIES
Check engine oil daily.
Operate engine at normal loads.
Check indicator lights and gauges (if equipped) frequently during operation.
Avoid excess engine idling.
Perform all engine maintenance in the Engine Instruction Manual.
NOTE: The engine owner is responsible for the performance of the required maintenance as
defined by the engine manufacturer in the written instructions found in the Engine Instruction
Manual provided with the engine.
NOTE: Start engine only from the operator’s seat, with the foot pedal in the neutral position
and the park brake engaged.
PRE-START CHECKLIST
CHECK oil level, add if low. Do not overfill.
CHECK fuel level, add if low.
CHECK cooling air intake areas and external surfaces of engine. Make sure they are clean
and unobstructed.
CHECK that the air cleaner components and all shrouds, equipment covers and guards are
in place and securely fastened.
CHECK forward / reverse pedal. Make certain that the pedal is exactly in neutral; if not, the
engine will not start.
WARNING: LETHAL EXHAUST GASES
Engine exhaust gases contain poisonous carbon monoxide. Carbon monoxide is odorless,
colorless and can cause death if inhaled. Avoid inhaling exhaust fumes.
NEVER RUN THE ENGINE IN A CLOSED BUILDING OR CONFINED AREA WITHOUT
HAVING ADEQUATE VENTILATION!