Allmand Brothers PAL4000 - Manual (Page 10)

10
SAFETY
PREPARING THE PAL 4000 GP
The PAL 4000 GP light tower requires service as well as proper operation in order to provide the
performance and safety it has been designed for. Never deliver or put machine into service with
known defects or missing instructions or decals. Always instruct the customer in proper operation
and safety procedures as described in this Operator’s Manual. Always provide the manual with the
equipment for proper and safe operation.
CHECK LIST
 Visually inspect the equipment to ensure that all instructions and decals are in place and legible.
 Inspect the light assemblies for damage and test for proper operation.
 Inspect the electrical wiring for signs of damage. Danger! Electrocution Hazard.
Do not operate the light tower if the insulation on the electrical cord or other
electrical wiring is cut or worn, or if bare wires are exposed. Repair or re
place damaged wiring before starting the engine.
 Check to make sure the Light Tower Operator’s Manual is with the equipment.
 Check to make sure the quick reference operation card is with the equipment and properly teth-
ered.
 Inspect the machine physically for damage and repair if necessary.
After completing the pre-operation check list, operate the tower through a complete opera-
tion cycle, following the operating instructions in the PAL 4000 GP Operator’s Manual.
Warning! Unsafe operation Hazard. Never permit anyone to install or operate the equipment
without proper training.
ALWAYS READ AND UNDERSTAND THE INSTRUCTIONS FIRST.