Allmand Brothers NIGHT LITE PRO V - Manual (Page 44)

44
6/9/2011
OPERATION
SHUTDOWN PROCEDURE
Shutdown - Short Period
When shutting down the light tower for a
short period, perform the following proce-
dures.
1. With the lights off, lower the light tower
to the full DOWN position; see Raising
and Lowering the light tower on page
43.
2. Turn the engine off. Refer to your En-
gine Operator’s Manual for stopping
procedure.
Shutdown - Long - Term or Prepare for
Trailering
When shutting down the light tower for
long periods of time or when preparing to
trailer, see Long - Term Storage section on
page 51 or Shutdown - Prepare for Trailer-
ing section on page 20.
AUXILLARY AC OUTLET OPERATION
Depending on model options, the conven-
ience panel is equipped with two 220VAC
outlets for powering accessories from the
generator. Power is supplied to the outlets
when the engine/generator is running.
The 220VAC outlet is protected by a 10 -
amp circuit breaker.
If the outlet circuit breakers trip, switch off
the lights, remove the load to the outlets
and wait 10 minutes for the bulbs to cool
before turning them back on.
1. Disconnect the load from the outlet.
2. Turn off the tower lights (if used).