Allmand Brothers NIGHT LITE PRO V - Manual (Page 19)

19
6/9/2011
TRAILERING, TRANSPORTING AND LIFTING
Before trailering, transporting or lifting, read Safety on page 8.
The complete engine and generator set is housed in a lockable enclosure with the frame fabricated
from heavy gauge steel mounted on a two-wheel, leaf spring axle.
BEFORE TRAILERING OR TRANSPORTING
Perform the following before trailering / transporting:
 Lower the light tower and shut down the tower lights and the engine; See Shutdown - prepare
for trailering on page 20.
 Visually inspect the trailer and equipment for damage. Repair or replace any components as
needed before trailering.
 Check the trailer lights for proper operation
 Inspect the tires to insure good condition and proper inflation.
 Inspect trailer springs and undercarriage for damage or loose parts.
 Check the hitch assembly and safety chains.
 Ensure the outriggers and jacks are properly stowed.
 Ensure the ground rod and cable are disconnected and properly stowed.
 Clean any spills from inside the trailer bilge area around the outside of the trailer; they may have
occurred during operation.
 Ensure all compartment doors are closed and securely locked.