Controls and components – Allmand Brothers VSERIES HYDRAULIC User Manual
Page 17
16
16
17
CONTROLS AND COMPONENTS
NOTE:
COMPONENTS SHOWN ARE STANDARD. PICTURES MAY VARY WITH DIFFERENT OPTIONS.
FIG. 1. AC CONTROL PANEL
FAILURE TO UNDERSTAND AND COMPLY
WITH SAFETY RELATED INFORMATION
AND INSTRUCTIONS MAY RESULT IN
INJURY TO THE OPERATOR OR OTHERS.
IF YOU DO NOT UNDERSTAND ANY PART
OF THIS CONTACT YOUR DEALER FOR
CLARIFICATION PRIOR TO OPERATING
EQUIPMENT.
SAFETY WARNING
FIGURE 1
FIGURE 2
1. Switch, Circuit Breaker (Lights 1 through 4)
2. Switch, Circuit Breaker (240V Receptacle)
3. Switch, Circuit Breaker (120\/ Receptacles
)
FIG. 2. DC CONTROL PANEL
4. Voltmeter (optional)
Indicates charging circuit voltage
5. Hour Meter
Shows total elapsed hours of engine operation.
6. Momentary Contact Switch. Lift up to raise and
extend the tower.
Press down to Iower the tower.
7. Ignition Switch
8. Glow plug indicator
release Ignition switch when indicator begins
glowing.
9. 2 AMP Circuit Breaker (Hydraulic Pump)
1
2
3
4
5
6
9
8
7