Alinco EJ-50U - Manual (Page 38)

38
example STREAMD ON
When a received packet contains stream-change code, this parameter determines whether or not to output both
codes. When ON is selected the codes are both displayed. This enables you to identify which is the received code
and which is the one received from other stream’s packet. OFF disables this function and the code won’t be
displayed for both.
9-1-4 LCSTREAM command
Abbrev. LCS default ON range ON/OFF
example LCS ON
When selecting a stream, A-J, this command determines if lower case characters should be converted to upper
case or not. When it is ON, the stream name A-J will be converted to upper case automatically enabling it to
change the stream anyway. OFF disables it thus error message [? Link out of range] appears when the lower case
is used.
9-1-5 STREAMCA command
Abbrev. STREAMC default ON range ON/OFF / STREAMC ON
This is to select whether or not the call sign of the connected station is to be displayed along with the stream
name, when a packet is received in the multi-connect mode. ON enables, OFF disables.
10 Message Board feature (BBS)
This TNC unit is installed with a simplified message board feature. Messages sent from other stations will be
saved in the TNC. Messages can be sent to the TNC even when a PC is not active. This chapter explains Setting
commands, Operation commands (for system operator), LEDs related to message board and operations for the
users. The capacity of the mailbox is 110kb.
10-1 Setting commands for Message board
10-1-1 MBOD command
Abbrev. MB default OFF range ON/OFF
example MB ON
This parameter allows the user to activate (or deactivate) the MB (message Board).
ON enables, OFF disables.
Use MYMCALL command to set the MB callsign prior to use.
When OFF is selected, if a request for connection is received at MYMCALL, the BBS will refuse the connection
request, sending a BUSY code.
10-1-2 MYMCALL command
Abbrev. MYM default None range 6 digit alphanumeric+SSID
example MYM W1AAA-11
Sets the callsign used exclusively for the MB. Do not use the same callsign as your regular MYCALL, but you
may use an SSID, such as MYCALL-1. MB function can’t be activated without an entry in this setting. MYM
callsign does not function as a digipeater.
10-1-3 TOUT command
Abbrev. TOUT default 30 range 0-250
example TOUT 12
This command determines the time-out time of the message board in units of 10 seconds. When the
destination’s packet is not received within the TOUT setting time while connected to MB, The MB drops the