To enable your settings – Airlink RT211W User Manual
Page 20
54Mbps Wireless Access Point User Manual
14
To enable Your Settings
After you have customized the settings and then click the Apply
button, the device will begin registering your settings. You will be
prompted to wait for a few seconds for the AP to commit changes
to permanent storage. During this process, it is important not to
switch on or off the AP otherwise damage may be caused to the
device.
After the settings have been registered, the screen will return to
previous page and the settings are effective. You may then
proceed with other configuration tasks.
Figure 4-2 Apply Changes