AIRLESSCO HSS9000 - Manual (Page 16)

Maintenance
16 3A1188C
Packing Replacement Procedures
1. Soak all Leather Packings in oil for 5-10 minutes
before assembly.
2. Place glands and packing on inverted piston in the
following order and orientation.
a. Male gland (10)
b. Alternate blue UHMWPE (6) and leather pack-
ings (1)
c. Female gland (11)
d. Backup washer (12)
e. Piston wiper
NOTE: The special sealing patch on piston valve
threads is good for 4 repackings. Use Loctite on piston
valve threads after 4 repackings.
3. Insert ball (13) in piston rod (8). If Loctite is applied
to piston threads, insure that none gets on ball.
4. Install piston valve (14) to piston rod(8). Torque to
55 +/-3 ft-lb (74.57 =/- 4 N-m).
5. Place male gland (9) in cylinder.
6. Alternately stack UHMWPE (6) and leather pack-
ings (1). Note orientation.
7. Place female gland (10) in top of cylinder. Seat
packings.
ti8854b
14
12
11
10
6
1
13
8
ti8855b
ti8850a
8
14
ti11819b
6
9
1
10