Eaton Electrical Powerware BladeUPS Bar - Manual (Page 10)

INSTALLATION
EATON Powerware ® BladeUPS ® Bar Installation Guide S 164201723 Rev P01 6
Checking the Package Contents
Verify that the following items are included:
S BladeUPS Bar 60
A six-socket bar with (1) attached terminal block assembly,
(1) attached base bracket, and (3) attached mounting brackets
S Wireway main housing with (2) attached side brackets, (1) attached
terminal block housing, and (1) attached wireway access cover
S Front cover mounting panel
S (2) front covers
S Ferrite assembly with 38 cm (15”) tie wrap
S This user’s guide
S Packaged hardware items:
- (14) M6 ×12 hex bolts, plus (1) extra
- (4) M5 ×16 hex bolts
- (6) M6 ×12 pan-head screws, plus (1) extra
- (16) M4 ×8 pan-head screws
- (6) M6 split lock washers, plus (1) extra
- (4) M5 cage nuts
- (3) M6 hex nuts, plus (1) extra