ACTi ENR-1000 - Manual (Page 15)

www.acti.com
ENR-1000 Series User’s Manual
15
Reset to Factory Default
By resetting this device, all your system settings and system log will return to factory default.
It is strongly recommended that you back up previous settings with Backup function and
export the system logs before resetting to
factory default.
1. To begin, please turn off the device
first.
2. Press down the Power Button to
boot up the device, and immediately
press and hold the Reset Button
with a pin or clip, the red System LED
will light up for about 2~3 seconds,
and
you may release the Reset Button as the red light is off.
The device will enter the resetting process.
After the device automatically reboots, the resetting process is done and you may log in.
LED Indicators
The LED indicators on front panel show the current device status:
Item Indicator Status Color Description
Power LED Solid Blue The device power is on.
System Status
LED
Lights up for
three seconds
after Reset
Button is pressed
Red
The system resetting process is
initializing.
Solid The system service is running.
HDD LED Flashing Green The hard disk is recording.