Hardware manual – ACTi D21 User Manual
Page 13
Hardware Manual
In the example below, we successfully the camera model that we had just connected to the
network.
By clicking the mouse on the camera model, it is possible to automatically launch the default
browser of the PC with the IP address of the target camera filled in the address bar of the browser
already.
If you work with our cameras regularly, then
there is even a better way to discover the
cameras in the network
– by using
IP Utility
. The IP Utility is a light software tool that can not
only discover the cameras, but also list lots of valuable information, such as IP and MAC
addresses, serial numbers, firmware versions, etc, and allows quick configuration of multiple
devices at the same time.
The IP Utility can be downloaded for free from
http://www.acti.com/IP_Utility
.