Installation and access, Camera installation – ACTi D21 User Manual
Page 10
Hardware Manual
Installation and Access
Camera Installation
The box camera may be installed indoors or outdoors (requires waterproof housing).
In both cases, the mounting block (included in the package) is needed.
Indoor Installation
For ceiling installations, the mounting block has to be mounted to the top side of the camera. For
wall installations, the mounting block has to be mounted to the bottom side of the camera.
An additional mounting bracket is needed to complete the installation (not included in the
package). You may use any of the local suppliers or purchase one from the camera manufacturer.
The following bracket is offered by the camera manufacturer:
This camera can be surface mounted without needing any additional accessories. Use the
screws from the screw pack and mount the camera to the surface using following screw holes.
Outdoor Installation
Outdoor installations require waterproof
housing and the heavy duty bracket.
The following housing solutions are
offered by the manufacturer:
The outdoor bracket can be mounted onto
the wall.