ACTi ACM-7411 User Manual

Page 22

2-16

Scenario 1 – using the side hole.

Scenario 2 – using the bottom

hole.

Screw the body of the conduit gland into the camera and fix it with the lock nut

(included in the set of conduit gland that you purchased) from the inside of the

camera..

Connect the Ethernet cable to the camera’s network port. If you are not using PoE,

then please remember to pull the DC power cable through the flex conduit as well,

and connect to the camera at this point.

Push the head of the flex conduit, wrapped with sealing insert, into the body of the

conduit gland.