ACTi TCM-6630 - Manual (Page 39)

www.acti.com
TCM-6630 Hardware User’s Manual
39
The Cruise line can be defined in CRUISE setup menu.

DWELL TIME
The DWELL TIME is the duration of executing ALARM ACTION: Preset or Sequence. When
alarm takes place, the dome will go to the preset position or execute sequence function and
stay at each sequence point for a period of time (1~127 seconds). If select , the
dome will go to the preset position and stay there until alarm condition is released or users
rotate the dome.

EXIT
Exit the ALARM SETTING menu.
HOME SETTING
Users are able to set an operation mode to ensure constant monitoring; if the dome idles for a
period of time, the pre-set function will be activated automatically, this is the HOME function. HOME
function allows constant and accurate monitoring, to avoid the speed dome stops or missing
events.

HOME FUNCTION
The item is used to enable or disable the HOME function.

SELECT MODE
Select one of the modes that the dome should execute when HOME function is enabled and
the RETURN TIME is up. The options are , , and
.
NOTE: The DWELL TIME is only accessible when selecting
ALARM ACTION: Preset or Sequence.
HOME SETTING
HOME FUNCTION OFF
SELECT MODE PRESET
PRESET POINT 001
RETURN TIME 001
GO ENTER
EXIT YES