Step 1: attach the pole mount and bracket, Outdoor housing – ACTi Indoor Box Camera with Outdoor Housing on Vertical Pole User Manual
Page 21
Installation Guide
Installation Procedures When Using
Housing without Heater and Fan
This section provides step-by-step procedures in installing the camera on a vertical pole using
the Pole Mount with Mounting Bracket and Housing without heater and fan.
Before installation, prepare the following tools and accessories which are not included in the
camera package, thus must be purchased separately:
Pole Mount with Mounting Bracket and Housing (
SMAX-0095
)
Exterior-Grade Ethernet Cable
Step 1: Attach the Pole Mount and Bracket
1.
Using a screwdriver, turn the screw head of the wire strap counter-clockwise continuously
until the two ends are detached.
2.
Insert the wire strap through the strap holes of the pole mount.
This manual is related to the following products: