ACTi Indoor PTZ on Straight Wall with Wall Mount - Manual (Page 4)

www.acti.com
Installation Guide
4
2a. If the cable(s) will pass through the wall , insert the cable(s) through the cable hole as
marked below (A).
2b. If the cable will go along the wall , remo v e the pre-cut tab on the L-type wall mount
using pliers. Then route the cable through the cable holes (A to B) as marked below.
3. With the cable(s) dangling, attach three (3) screws (included in the camera package) to install
the L-type wall mount onto the wall.
A
B
A