Step 4: connect the cable, Step 5: access the camera live view, Installation guide – ACTi Indoor Dome on Tilted Wall User Manual
Page 6
Installation Guide
Step 4: Connect the Cable
1.
Connect the network cable to the Ethernet port of the camera.
2.
Connect the other end of the network cable to a switch or injector. Then, connect the switch
or injector to a network, PC and a power source. See Power-over-Ethernet (PoE) connection
example below.
Network
AC Power
Source
PoE Injector /
PoE Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
Step 5: Access the Camera Live View
How to Access the Camera Live View
on page 9 for more information on how to access
the Live View of the camera.
Ethernet Port
This manual is related to the following products: