Installation procedures – ACTi Indoor Mini Dome and Mini Fisheye Dome on Tilted Wall with Gang Box User Manual
Page 3
Installation Guide
Installation Procedures
This section describes the procedures in installing the camera on a gang box via PMAX-0805
Gang Box Converter. The Gang Box Converter supports 4” round and 4” octagon gang boxes,
which can either be installed on the surface or inside the surface.
NOTE:
The gang box and the gang box converter are not included in the camera package.
Before installation, prepare the following:
Gang Box (4” round or 4” octagon)
PMAX-0805 Gang Box Converter
Network Cable
Phillips Screwdriver
NOTE:
For simplicity, the camera with fixed lens was used to take the images in the succeeding
sections; similar procedures apply to the other models in terms of installation. Therefore, the
camera images used in the succeeding sections may differ from your camera.