Hardware manual – ACTi D61A User Manual
Page 10
Hardware Manual
1) Ethernet Port
Connects to a network using an Ethernet cable.
2) Memory Card Slot
Insert a memory card into this slot for local recording purposes. See
on page 30 for more information.
NOTE:
Supports microSDHC and microSDXC cards.
3) Reset Button
The purpose of reset button is to restore the factory default settings of the camera, including
the administrator
’s password.
The reset button can be used for following purposes:
The administrator
’s password has been forgotten and therefore the camera cannot be
accessed.
1.
In case of IP address, mask, or allow/deny filter related issues, resulting with inability to
modify these settings.
2.
In case of connectivity issues or abnormal video quality.
How to do the reset properly?
Press and hold the reset button for 5 seconds.
4) Digital Input / Output (DI/DO) and Audio Input / Output
This connector connects to digital input or output devices, such as an alarm trigger, panic
button, etc., as well as audio input and output devices, such as microphones and speakers.
Digital Input (DI) and Digital Output (DO) devices are used in applications like motion
detection, event triggering, alarm notifications, etc. See
page 14 and
on page 17 for more information.