beautypg.com

Basic connections – ACTi KCM-5211 User Manual

Page 10

background image

www.acti.com


KCM-5211 Hardware Manual

10

Basic Connections

Follow the procedures below to connect the IP device to the respective apparatuses.

If you have a PoE(Power over Ethernet) supported switch or injector:

1)

Connect your IP Box Camera to the Switch / Injector by CAT5 or CAT6 cables with RJ45

connector.

2)

Connect your Switch / Injector to PC with another CAT5 / CAT6 network cable.

If your switch does not support PoE, and you are powering the camera with power

adaptor:

1)

Connect the power adaptor to IP Box Camera

2)

Connect IP device

’s Ethernet port to Network switch (via RJ45 connectors).

Connect a PC to the Ethernet switch (via RJ45 connectors)

Please refer to our

PoE Guide

for more details on Power over Ethernet related concepts.

See also other documents in the category ACTi Camcorders: