Step 5: connect to network, Step 6: access the camera live view, Step 7: adjust the viewing angle and focus – ACTi D91 User Manual
Page 20: Step 8: close the dome cover
Hardware Manual
Step 5: Connect to Network
On the network side, connect the other end of the network cable to a network switch. See
on page 21 for more information.
Step 6: Access the Camera Live View
on page 30 for more information on how to access the Live View
of the camera.
Step 7: Adjust the Viewing Angle and Focus
Based on the Live View, adjust the viewing angle, focus, and orientation of the camera.
Adjustments vary depending on model, see
How to Adjust the Viewing Angle and Focus
How to Rotate the Viewing Orientation (E96 / E98)
on page 24 for more
information.
Step 8: Close the Dome Cover
1.
Align cable tab side of the dome cover to the direction of the network cable.
2.
Tighten the three (3) screws using the supplied hex screwdriver to attach the dome cover.
Final installation should look similar to the illustration below.