ZeeVee ZvBox 160 - Manual (Page 5)

ZvBox 160 Get Going Guide Page 5 of 8
Basic Installation
F actory default settings allow your ZvBox to broadcast a component HD source with
digital audio on Channel 2.1, over coax cabling, for reception at connected HDTVs.
Plug the power supply into an AC outlet and connect the output to the ZvBox 1.
Connect Component Video of an HD source* to the ZvBox 2.
Connect Digital Audio from the HD source to the ZvBox 3.
Connect Coax output of the ZvBox to the HDTV RF input. 4.
Tune the HDTV to channel 2.1 to view your new ZV channel. 5.
Configuration and firmware updates are done via a software application called ZvConfig.
Visit www.zeevee.com/configuration to download ZvConfig. The broadcast channel can
be also set via a front-panel button as described on the next page.
For help with installing ZvBox onto a coax network, please see our tutorials,
found on the ZeeVee web site: www.zeevee.com/support/training.
*Make sure the source component’s video output is set to 720p or below.
HDTV
Coax Cable
RF Input
Back of ZvBox 160
Audio Out
S/PDIF
Audio
Cable
Video Out
Component
Video Cable
HD Source