ZeeVee ZvSync (QAM) - Manual (Page 12)

Page 12
|
ZvSync-NA User’s Manual www.zeevee.com
2 Setup
This chapter describes how to connect your ZvSync Receiver to the television
and receiving apparatus appropriately. The receiver has various options and
interfaces for connectivity. Select the method appropriate to your application.
2.1 Connecting
to
an
Aerial
Connect you antenna to the ZvSync receiver’s ‘ANT’ jack for Over-the-Air
reception as follows:
2.2 Connecting
to
a
Cable
Feed
To receive a cable television signal or a channel generated by ZeeVee’s
encoder/modulator products connect the cable feed to the ‘ANT’ jack on the rear
face with a 75ohm F-Type cable.