Widex SCOLA Classmate - Manual (Page 16)

16
Programming
During the first minute after the SCOLA CLASSMATE is
switched on, it is possible to set / change the synchro-
nisation channel.
Set the SCOLA TEACH33/44 to the required channel, or
set the SCOLA PROGRAMMER to the appropriate chan-
nel in “Set channel” under the “ FLEX programming”
menu.
Hold the SCOLA TEACH33/44 / SCOLA PROGRAM-
MER within a distance of approximately 50 cm from the
SCOLA CLASSMATE and press the “Enter” button.
When the LED flashes three times, the SCOLA
CLASSMATE is programmed and ready for use.
Reprogramming of the SCOLA CLASSMATE is only
necessary if the transmitting channel used in the class-
room is changed.