Widex SCOLA Buddy User Manual
Page 20
APPLYING STICKERS
You can also personalise your SCOLA BUDDY by
placing small stickers on the covers .
This is very popular among children, in particular, but
remember not to place the stickers over the LEDs .
When removing the stickers, first remove the covers
from the SCOLA BUDDY unit, then clean the covers
with warm water . (Alcohol must NOT be used) .
SPECIAL CONFIGURATIONS
The SCOLA BUDDY device is very flexible and can be
configured in many different ways . Channels can be
installed/removed, various frequencies for beep
tones are available, and the LEDs can be permanent-
ly switched off .
All of the special settings can be configured by your
SCOLA provider .
20