Widex SCOLA FLEX User Manual
Page 19
![background image](https://www.manualsdir.com/files/810246/content/doc019.png)
19
• The receiver is set to ”FM” and the signal from the
FM microphone or from the audio equipment is
too weak, or there is no signal. Set the receiver to
”FM+M”. Check that the SCOLA transmitter is turned
on, place it closer to the person speaking, or turn up
the volume on the audio equipment.
• Noise and whistling are interfering with reception, pos-
sibly because two or more FM transmitters are trans-
mitting on the same channel as your receiving channel.
To avoid this type of interference, make sure that
only one FM transmitter is transmitting on the receiv-
ing channel.
Try turning off your SCOLA transmitter. If you hear
another FM signal, this is what is causing the noise.
There are several ways to avoid interference :
• Turn on one FM transmitter only.
• Find another available channel, and select this
channel on both the receiver and transmitter.
• Increase the distance between the interfering FM
transmitter and the receiver until the interference
stops.