Displaying the black screen, Displaying and setting the break timer, Image projection – Eiki DLP Projector EIP-5000 User Manual
Page 52
50
Displaying the Black
Screen
This function allows you to tempo-
rarily display the black screen.
1
Press
.
2
Pressing
again will turn
the projected image back on.
Displaying and Setting
the Break Timer
This function allows you to show the re-
maining time for break during meeting.
1
Press
.
2
While “
” is displayed, press
', ", \ or | to set the break
timer.
• You can set anywhere between 1 and
60 minutes (in 1 units).
• The break timer starts to count down as
soon as '
'
'
'
', "
"
"
"
", \
\
\
\
\ or |
|
|
|
| is pressed.
Note
• Pressing
will cancel the break timer.
• Auto Power Off function will be temporarily
disabled during the break timer.
When no input signal is detected for more
than 15 minutes, the projector will automati-
cally enter the standby mode if the break
timer has elapsed.
• The break timer will be displayed on the
startup image. To change the screen dis-
played during the break timer, change the
setting of “Startup Image” (see page
).
• When “Slave” is set for “Stack Setting”, the
break timer is not displayed. (See page
.)
▼Projected Image
▼On-screen Display
BLACK SCREEN
button
Mouse/
adjustment
button
(
'
/
"
/
\
/
|
)
UNDO
button
BREAK TIMER
button
Image Projection