Widex T-Dex - Manual (Page 5)

5
Operation
Adjusting volume
1. Press receiver button R2+ (volume up) or R2- (volume down) to set comfortable listening level.
2. The receiver indicators R3 to R7 illuminate depending on volume level.
R2+
R2-
2 1
Please note:
• The maximum volume level has been reached if all five indicators R3 to R7 are illuminated. If the signal is still too
weak, adjust the volume on your mobile telephone or contact your hearing care professionel for adjustment of the
telecoil in the hearing aid.
Indicators
Below you can see an overview of the light indicators on T-DEX
Flashing blue (R1): Incoming call
Blue (R1): Wireless Bluetooth call activated
Flashing blue (R3): No Bluetooth connection
Green (R3-R7): Volume level
Flashing red (R5): Battery low
Charging
If the T-DEX light indicator R5 flashes red during operation, or if the unit cannot be turned on, T-DEX
requires recharging.
1. Connect the power supply wire to T-DEX’s jack R11.
2. Connect the power supply to a power source and turn on.
3. The light indicator R5 lights continuously red during recharging.
4. When T-DEX is fully recharged, light indicator R5 lights continuously green.
Please note:
• We recommend fully charging
batteries before use, however,
partly charging the units does
not inflict damage to them.
R11
1 2
- +
3
4 Charged
*
* Plugs vary from country to country.