Westermo Viper-x12-p8 - Manual (Page 15)

15 6641-2252
LED Indicators
LED Status Description
DC
ON
USB
CON
RSTP
FRNT
X1
PoE
X5 X9
X6 X10
X7 X11
X8 X12
X2
X3
X4
ON OFF Unit has no power.
GREEN All OK, no alarm condition.
RED Alarm condition, or until unit
has started up. (Alarm conditions
are configurable, see ''WeOS
Management Guide'').
BLINK Location indicator ("Here I
am!"). Activated when connected
to IPConfig Tool, or when
configuring the unit via Web or
CLI.
DC OFF Unit has no power.
GREEN Power OK on DC1 and DC1.
RED Power failure on DC1 or DC2.
FRNT OFF FRNT disabled.
GREEN FRNT OK.
RED FRNT Error.
BLINK Unit configured as FRNT Focal
Point.
RSTP OFF RSTP disabled.
GREEN RSTP enabled.
BLINK Unit elected as RSTP/STP root
switch.
X1
to
X12 OFF No Link.
GREEN Link established.
GREEN
FLASH Data traffic indication.
YELLOW Port alarm and no link. Or if
FRNT, RSTP or Link Aggregation
mode, port is blocked.
PoE OFF Port does not consume PoE
power
GREEN Port consumes PoE Power