Westermo Viper-x12 - Manual (Page 15)

15 6641-2242
Connection to console port
(Viper-112/212/112/212-T3G Managed only)
The console port can be used to connect to the CLI (Command Line Interface).
The following steps needs to be taken
1. Connect the serial diagnostic cable
(use Westermo cable 1211-2215 to the console port).
2. Connect cable to your computer serial port.
3. Use a terminal emulator and connect with correct speed and format (115200, 8N1)
to the assigned port.
For more information about the CLI, see the WeOS management guide.
Connection to USB port
(Viper-112/212/112/212-T3G Managed only)
The USB port can be used to copy configuration and log files to/from the switch.
The following steps needs to be taken
1. Connect the USB plug (use Westermo USB plug 3641-0190) to the USB port.
2. Access the switch CLI (via console cable or SSH)
3. Use the CLI ''copy'' command to copy files between the USB plug and the switch.
For more information about the CLI, see the WeOS management guide.