Westermo Viper-x12 - Manual (Page 10)

10 6641-2242
X4, X8, X12 Gigabit Ethernet ports
Data rate
10 Mbit/s, 100 Mbit/s, 1000 Mbit/s, manual or auto*
Connection 8-pin M12
Transmission range Up to 100 m with CAT5e cable or better
FRNT reconfiguration time Typically below 400 ms
* Note! Full wirespeed (1000 Mbit/s) is not possible between port X4 and the other Gigabit ports due to
hardware limitations.
USB, USB port
Electrical specification
USB 2.0 host interface
Data rate Up to 480 Mbit/s (high-speed mode)
Maximum supply current 500 mA
Circuit type SELV
Isolation to Ethernet ports, 1500 VAC rms
DC, 1500 VAC rms
No isolation to CON
Connection 5-pin M12 female A-code, use Westermo USB plug 3641-0190
CON, Console port
Electrical specification
RS-232
Data rate 115.2 kbit/s
Data format 8 data bits, no parity, 1 stop bit, no flow control
Circuit type SELV
Isolation to Ethernet ports, 1500 VAC rms
DC, 1500 VAC rms
No isolation to USB
Connection 5-pin M12 female B-code, use Westermo cable 1211-2215