Description – Westermo ODW-622 User Manual
Page 7
7
6650-2234
Description
This ODW-622 is a fibre optic modem used for redundant ring and multidrop applica-
tions. It acts as a converter between a serial port and a fibre optical link. The maximum
distance of the fibre link depends on selected transceiver and fibre type. Distance up to
80 km (50 miles) is available.
The ODW-622 is designed for harsh out-door usage, in industrial, road or railway
installations.
Data will be sent transparently over the fibre optical link via the serial interface RS-232.
Converter serial interface – optical fibre.
…
Redundant ring alternatively multidrop communication via fibre optical network.
…
Serial interface Asyncronous.
…
LC-2 Multimode LC connectors, 5 km (3.1 miles).
…
LC-15 Singlemode LC connectors, 15 km (9.3 miles).
…
LC-40 Singlemode LC connectors, 40 km (24.9 miles).
…
LC-80 Singlemode LC connectors, 80 km (50 miles).
…
Bi-di Multimode LC connectors, 5 km (3.1miles).
…
Bi-di Singlemode LC connectors, 20 km (12.5 miles).
…
Bi-di Singlemode LC connectors, 40 km (24.9 miles).
…
Bi-di Singlemode LC connectors, 60 km (37.3 miles).
…
Design for harsh environments.
…
Re-timing.
…
Redundant DC or AC power supply, 2 kVAC galvanic isolated to other ports.
…
Status interface for fault indication.
…
Small Form Factor Pluggable (SFP) transceivers.
…
9-position D-sub connector.
…
RS-232 interface.
…
Data rate up to 250 kbit/s.
…
RTS/CTS control or data control.
…