Westermo MRD-310 - Manual (Page 21)

21 6623-2201
Adding a Network Connection Profile
To access the wireless packet mode settings click on the ”Packet mode'' tab. The screen
shown in Figure 9 will be displayed. The page shows the connection configuration details
and is divided into two sections. The first section shows the current connection state
selected profile. The second section lists the available profiles. A connection profile con-
tain the settings required to connect to a provider's network. The unit allow multiple
profiles to be configured to allow quick changes to the network connection settings. For
most applications only one profile is required.
Figure 9
The 3G network provider will provide the items listed below which should be entered
into the appropriate fields in the ”Add new profile” section as shown in figure 10.
• APN (Access Point Name)
• Dial string
• Authentication (None/PAP/CHAP)
• Username
• Password