Westermo MRD-310 - Manual (Page 10)

10 6623-2201
Interface specifications
Power
Rated voltage 10 to 60 VDC
Operating voltage 10 to 60 VDC
Rated current (Max) 800 mA
Inrush current 1.0 A
Polarity Polarity dependant, reverse polarity protection
Connection Detachable screw terminal
Connector size 0.2 – 2.5 mm 2 (AWG 24-12)
Shielded cable Not required
RS-232
Electrical specification EIA/TIA-232
Data rate 300 bit/s – 230400 bit/s
Data format Data bits: 5, 6, 7 or 8
Stop bits: 1 or 2
Parity: None, Odd or Even
Flow control: None, Software, Hardware or Both
Protocol Transparent, DNP3, Modbus, and Modem emulation
Retiming Yes
Transmission range ≤ 3 m
Connection 9-pin D-sub female (DCE) and 9-pin D-sub male (DTE)
Shielded cable Not required
Antenna
Frequency bands 850 MHz – 2100 MHz
Connection SMA
SIM
Electrical specification UICC/SIM 3V and 1.8 V
Ethernet
Electrical specification IEEE std 802.3 2000 Edition
Data rate 10 Mbit/s, 100 Mbit/s, manual or auto
Duplex Full or half
Transmission range 100 m / 328 ft
Connection RJ-45