Westermo MCW-211 - Manual (Page 10)

10 6645-2204
Interface specifications
Power
Rated voltage
12 to 48 VDC
Operating voltage 10 to 60 VDC
Rated current 200 mA @ 12 VDC
100 mA @ 24 VDC
50 mA @ 48 VDC
Rated frequency DC
Inrush current I2t 0.03 A²s @ 12 VDC
Startup current* 0.75 A peak
Polarity Reverse polarity protected
Redundant power input Yes
Isolation to Ethernet TX
Ethernet FX
Connection Detachable screw terminal
Connector size 0.2 – 2.5 mm² (AWG 24 – 12)
Shielded cable Not required
* Direction relative this unit
Ethernet TX
Electrical specification
IEEE std 802.3. 2000 Edition
Data rate 10 Mbit/s or 100 Mbit/s, manual or auto
Duplex Full or half, manual or auto
Transmission range 100 m
Isolation to Power
Connection RJ-45
Ethernet FX
Optical specification
IEEE std 802.3. 2000 Edition
Data rate 100 Mbit/s
Duplex Full or half
Connection SC, ST or LC