Specifications ld-63h, Functional description ld-63h – Westermo LD-63H AC User Manual
Page 2

2
6072-2281
Specifications LD-63H
Transmission
Asynchronous
*
, full/half duplex or simplex
Interface 1
EIA RS-232/ITU-T V.24
9-position detachable screw-terminal
Interface 2
4 ST-connectors, see table of power budget
Indicators
Power, TD, RD, TX1, TX2, RX1, RX2
Data rates
Up to 115,2 kbit/s
Temperature range
5–50°C, ambient temperature
Humidity
0–95% RH without condensation
Dimension
55x100x128 mm (WxHxD)
Weight
0.6 kg AC / 0.3 kg DC
Mounting
On 35 mm DIN-rail
Power supply alternatives
Functional description LD-63H
LD-63H is developed for RS-232 multidrop communication via fibre-optic cables. The H-version
is developed for data and status transmission in a multidrop network. Transmission rates up to
115,2kbit/s and transmission distances up to 25km is possible.
The LD-63H consists of two F/O channels, each with its separate transmitter and receiver
(TX1, TX2, RX1 and RX2). On the front of the unit there are seven LED’s indicating the data-
transmission on the channels. The fibre optic interface is transparent which means that data
received on RX1 is retransmitted on TX2 and data received on RX2 on TX1.
The number of LD-63’s that can be connected in series is limited, see chart on page 4.
* Synchronous protocols can be transmitted under certain circumstances.
See ”selection of bits” page 4.
Model description
LD-63H
LD-63H
LD-63H
LD-63H
LD-63H
AC
115V AC
DC
36–55V DC
110V DC
Power supply230V AC
115V AC
24V DC
48V DC
110V DC/80V AC
+15/–10%
+15/–10%
+50/–50%
+15/–25%
+10/–10%
Frequency48–62Hz
48–62Hz
–
–
–/48–62Hz
Fuse, F2
100mA S
100mA S
1.6A S
1.6A S
1A T/1A T
5x20 mm
5x20 mm
5x20 mm
5x20 mm
–/–
Littelfuse
Littelfuse
Littelfuse
Littelfuse
Wickmann
Power consumption
25 mA
50 mA
3W
3W
30 mA
Overvoltage
protection
430V
220V
–
–
430V
Isolation
1 500V
1 500V
500V
500V
3 750V
RMS