Welltech WellBG 5800 V.1.0 - Manual (Page 8)

Welltech Computer Co., Ltd.
Figure 2.1-3
Network
Boarder gateway 5800 has 2 network interfaces:
− Boarder gateway service interface: provide service over
this network. If you have DNS record, also you must be
setup DNS server to effect.
− Management interface: it is used for management
purpose.
Step 1:
After successfully logon to the system, we need to
change the network configuration. Click Control > Network to
setup the Service Interface parameters as figure 2.2-1.
Figure 2.2-1
Step 2:
Enter the deserved IP address, submask and default
gateway or selected to “Use DHCP”. Apply the change by
clicking Apply button as figure 2.2-2.
Boarder Gateway 5800 - 8 -